If Your Generator Needs To Feed Multiple High-Amperage Circuits Or Large Equipment... Rent An iLine Panel.
An iLine panel helps distribute high-capacity temporary power from a generator to multiple downstream panels, equipment connections, and jobsite systems while improving organization, load management, and electrical safety across the site.
Instead of relying on makeshift power setups or overcrowded distribution points, iLine panels provide a centralized solution for safely managing temporary power for construction sites, industrial shutdowns, events, pumps, HVAC systems, welders, and large-scale operations. This helps crews reduce downtime, simplify power routing, and maintain a cleaner, more reliable temporary electrical setup.
What Load Can an iLine Panel Handle?
iLine panels are available from 400 AMP to 2000 AMP with customizable breaker configurations. The right size depends on your total connected load, number of circuits required, and project duration.
Standard Distribution
400–800 AMP
Construction sites, outdoor events, data center bridge power, and light industrial maintenance with moderate connected loads.
Industrial & Turnaround
1200 AMP
Petrochemical turnarounds, facility maintenance, and switchgear replacement for industrial shutdowns.
Full Plant Shutdown
2000 AMP
Full plant turnarounds, large refinery shutdowns, and emergency power for major industrial and manufacturing facilities.
For projects exceeding standard iLine panel configurations, contact us about custom breaker layouts, 3-phase configurations, and medium voltage setups for large-scale industrial applications.
The Cost of Improvised Turnaround Distribution
What Happens When Industrial Power Is Not Properly Organized
Running a plant turnaround from a single generator output means one circuit fault stops power to the entire site. Without organized, breakered distribution, a single overloaded conductor takes everything offline simultaneously, creating delays that compound quickly on active shutdowns where every hour of lost production carries significant financial consequences. Turnarounds operate on tight schedules with large crews, heavy equipment, and multiple contractors working in parallel. Any interruption to temporary power does not just pause one task. It cascades across every team dependent on that source.
| Issue | Potential Cost |
|---|---|
| Turnaround Delay | $50K–$500K/day |
| OSHA Citation | Up to $156,259 |
| Fault Propagation | $10K–$100K+ |
Improvised temporary wiring on industrial sites also creates serious OSHA and NEC exposure. Unprotected conductors, missing GFCI protection, and undersized connections are among the most cited electrical violations on industrial jobsites. NEC 70 temporary wiring violations can reach $156,259 per willful citation, and incidents involving improvised distribution carry full liability for the facility owner and contractor of record. On a petrochemical or refinery site, the consequences of an electrical incident extend well beyond fines and into operational, legal, and reputational risk.
Proper iLine panel distribution eliminates both risks by giving each maintenance load its own protected circuit, isolating faults before they affect adjacent work areas, and providing a safer and more organized temporary power infrastructure from the first day of the shutdown. Configurations are sized and set up before delivery based on your total load, circuit count, and voltage requirements. Contact Us to spec the right configuration before your shutdown date.
iLine Panel vs. Distribution Panel
Not Sure Which Unit You Need?
Both provide breakered power distribution. The right choice depends on your amperage requirement and whether you need a standard configurable panel or a higher-capacity industrial PanelBoard.
ILine Panel
Modular I-Line Breakers
Square D I-Line circuit breaker design — the industry standard for temporary industrial distribution on Gulf Coast turnarounds.
400 AMP to 2000 AMP
Configurable branch circuits set to your load requirements before delivery. Each circuit independently protected.
Best For
Plant turnarounds, refinery shutdowns, switchgear replacement, and large industrial operations requiring high-amperage structured distribution.
Distribution Panel
Breakered Branch Circuits
Provides organized circuit distribution from a single generator or transformer source to multiple defined loads.
Configured to Your Load
Circuit count and breaker sizes set to your project specs before delivery. Up to 400A for most applications.
Best For
Construction projects, facility maintenance, and mid-scale temporary installations requiring organized circuit management.
Need An Industrial Generator With Your iLine Panel Rental?
20kW
Smallest in fleet
2,000kW
Largest in fleet
Same-day
Dispatch available