Theodore, AL sits on the Theodore Industrial Canal south of Mobile, where deep-water docking, rail spurs, and heavy-industrial tenants create power demands unlike a typical commercial job site. Stag Power Rentals supplies 20kW-2,000kW diesel generators for plants, terminals, and construction sites along the canal and the surrounding industrial park corridor, with units dispatched from our Dickinson, TX yard and delivered nationwide.
An industrial-park operation in Theodore needs power that can carry high-inrush process equipment, run unattended through a shift change, and stand up to Gulf Coast humidity and salt air near the water. If a storm is approaching, review our hurricane contingency power plan before you need it. Call 1-844-STAG-PWR or request a quote to get sizing started.
Theodore Industrial Port, operated by Core Industries on the Theodore Industrial Canal, handles bulk, break-bulk, and project cargo, including plant and energy equipment, across roughly 3,000 feet of docking with 40 feet of water depth. That means active loading, turnaround work, or new construction on a canal-facing parcel often has to share space with rail spurs, laydown yards, and other tenants moving cargo at the same time. A generator brought onto a site like that has to fit the access the site actually has, not the access a typical commercial lot would offer, and it has to run cleanly next to permanent plant operations rather than in an open field.
Stag’s diesel units are sized and configured for exactly that kind of constrained, working industrial site, from a single 45kW unit backing up a control room to multi-unit paralleled banks supporting a plant turnaround or a new build near the canal.
Questions? Call 1-844-STAG-PWR
Call Our Team: 1-844-STAG-PWR
Looking for a 20kW-2000kW Generator Near You?
Whether you are planning for an outage or have an emergency situation, we’re ready 24/7 to ship a generator that will meet your power requirements.
Theodore’s economy runs on the Theodore Industrial Canal, where plants and terminals move project cargo and run continuous process equipment that can’t tolerate an outage. Stag Power Rentals’ 20kW-2,000kW diesel fleet is sized for that scale, from single-unit backup at a control room to paralleled banks covering a full plant turnaround. Confirm current availability and lead time for your location.
20kW-2000kW • Portable • Trailer • Skid • Diesel Generators
Theodore is an unincorporated community in Mobile County, roughly 14 miles southwest of downtown Mobile along Interstate 10, and it carries a different industrial identity than the port city itself. Rather than downtown port and shipping offices, Theodore’s economy runs on the Theodore Industrial Canal, the surrounding industrial park land off Rangeline Road and I-10 Industrial Parkway, and heavy manufacturing and logistics tenants that need continuous, high-capacity power.
Stag Power Rentals dispatches diesel-only generators from 20kW to 2,000kW to plants, terminals, and contractors working in and around Theodore. Every unit ships from our Dickinson, TX yard, and we do not offer natural gas units on any project.
Theodore’s tenant base skews toward plant-scale and terminal-scale loads rather than single-building commercial accounts, so the sizes most requested here run higher than a typical retail or office project:
| Generator Size | Typical Theodore Application | Learn More |
|---|---|---|
| 20-45 kW | Control rooms, gate houses, site trailers, small pump or lighting circuits | 45kW Generators |
| 150 kW | Warehouse and light-manufacturing backup, mid-size construction power | 150kW Generators |
| 300 kW | Terminal and dock-side equipment, larger plant sub-loads | 300kW Generators |
| 600 kW | Process-line backup, plant turnaround power, distribution center support | 600kW Generators |
| 1,500 kW | Full plant or terminal outage coverage, multi-unit paralleling for large canal-side facilities | 1500kW Generators |
| Factor | Why It Matters in Theodore |
|---|---|
| Motor and pump startup loads | Process equipment, conveyors, and dock pumps on canal-side sites often draw a high inrush current on startup that the generator has to be sized past, not just for running load |
| Number of simultaneous loads | Plant and terminal sites frequently need more than one circuit backed up at once, which can call for a single larger unit or paralleled units instead of one small generator |
| Voltage and phase configuration | Industrial equipment on plant and terminal sites is commonly three-phase at higher voltages than standard commercial service, which narrows which units fit |
| Site footprint and access | Space near active docking, rail spurs, or laydown yards can be tight, which affects whether a single large unit or a smaller footprint with distribution equipment fits better |
| Factor | Impact on Pricing |
|---|---|
| Generator size (kW) | Larger units for plant and terminal loads carry a higher daily/weekly/monthly rate than a small site-support unit |
| Rental duration | A short-term turnaround job is priced differently than a standing arrangement for hurricane season or an ongoing construction project |
| Distribution equipment | Cable runs, distribution panels, or paralleling gear for multi-unit setups add to the total |
| Fuel and delivery logistics | Site access near the canal, rail spurs, or a secured industrial park gate can affect setup and fueling logistics |
Plants and terminals along the Theodore Industrial Canal schedule turnarounds and planned outages that require temporary power while permanent electrical systems are locked out. Stag supplies diesel units sized to a turnaround’s actual load list, including paralleled units for facilities that need more capacity than a single generator provides, so a plant can keep critical systems, lighting, and contractor equipment running for the length of the outage.
Sites at Theodore Industrial Port and along the broader Theodore Industrial Canal corridor are working cargo facilities first. Docking, rail spurs, and laydown areas are often in active use, so a generator delivery has to be coordinated around cargo movements and existing site traffic rather than dropped into an open lot. We work with site contacts ahead of delivery to confirm gate access, staging space, and where a unit can sit without interfering with dock or rail operations.
Process and material-handling equipment common to canal-side plants and terminals, pumps, conveyors, cranes, and compressors, can draw several times their running amperage the moment they start. We size units against that startup current, not just the steady-state load, so equipment doesn’t trip a generator that looks adequate on paper.
To get an accurate quote, tell us the equipment you’re backing up (including motor horsepower or starting-load specs where available), whether loads run at the same time or in sequence, your voltage and phase requirements, and how site access works at your specific parcel. That lets us match a unit, or a paralleled set, to the job instead of guessing at a size.
Theodore sits on the Alabama Gulf Coast, an area within reach of Atlantic hurricane season storm systems, and canal-side and low-lying industrial parcels can see storm surge and heavy rainfall during an active storm. Plants, terminals, and industrial-park facilities that need to keep critical systems running through severe weather, or restore power quickly afterward, should have a rental plan in place before storm season peaks. See our hurricane contingency power plan, and if you support public infrastructure, see our municipal and government and water district generator programs.
Stag dispatches from Dickinson, TX, and reaches Theodore via the Interstate 10 corridor, the same highway that runs directly through Theodore and past Exit 13 (Theodore Dawes Road), which feeds the industrial park land along Rangeline Road and the I-10 Industrial Parkway area. That direct I-10 routing is what makes canal-adjacent and industrial-park sites straightforward to reach: once a unit reaches Theodore, it’s a short final leg on local industrial roads rather than a route through downtown Mobile street traffic. We coordinate delivery timing around your site’s gate hours, dock or rail activity, and any access restrictions specific to your parcel.
What generator sizes does Stag rent in Theodore?
We rent diesel generators from 20kW to 2,000kW, dispatched from our Dickinson, TX yard to Theodore and the surrounding Mobile County industrial corridor.
Is natural gas power available?
No. Stag Power Rentals’ fleet is diesel-only.
Can Stag deliver to a site on the Theodore Industrial Canal or inside a secured industrial park?
Yes. We coordinate with your site contact ahead of time to confirm gate access, staging space, and any restrictions around active dock or rail operations before delivery.
Do you provide power for plant turnarounds and planned outages?
Yes. We size single or paralleled units to a turnaround’s load list so plants and terminals can keep critical systems running while permanent electrical work is underway.
What information does Stag need to quote a Theodore project?
The equipment being backed up (including starting-load or motor horsepower specs where available), whether loads run simultaneously or in sequence, voltage and phase requirements, and details on site access.
Does Stag offer generators for hurricane season standby in Theodore?
Yes. See our hurricane contingency power plan for planning ahead of storm season, and contact us for standby arrangements.
How is a Theodore rental priced?
Pricing depends on generator size, rental duration, any distribution equipment needed, and site-specific delivery and fueling logistics.
For plant turnarounds, terminal operations, construction on industrial-park land, or storm-season standby along the Theodore Industrial Canal corridor, Stag Power Rentals ships diesel generators from 20kW to 2,000kW from our Dickinson, TX yard.
Stag Power Rentals
2025 Nichols Ave
Dickinson, TX 77539
Industrial & Commercial Generator Rentals
1-844-STAG-PWR
If a hurricane has left your business without power call us. We can guide you through the generator rental process and help restore power to your business with as little downtime as possible.
If you want to get ahead of power outage, then signup for our Hurricane Contingency Plan >
