Stag Power Rentals supplies industrial and commercial generator rentals from 20kW to 2,000kW, dispatched from our Dickinson, Texas yard and delivered nationwide, to Cameron, Louisiana, the parish seat of Cameron Parish and home to major LNG export infrastructure along the Calcasieu Ship Channel. Our fleet is diesel-only and load-bank tested before it ships, built for the sustained runtimes that industrial sites, marine terminals, and municipal operations require in a coastal parish where grid restoration can lag well behind the rest of Southwest Louisiana. We’ve supported planned and emergency power for special events, commercial properties, healthcare facilities, construction sites, and industrial operations across the Gulf Coast, sizing every rental to the job’s actual load.
Whether Cameron needs a single unit to bridge a planned outage or a larger deployment to support LNG-adjacent contractor work, storm recovery, or parish operations after a hurricane, our team sizes and configures the right generator for the load. Review our hurricane contingency power plan, call 1-844-STAG-PWR, or request an Industrial Generator Rental Quote to get started.
Cameron sits at roughly 3 feet above sea level at the mouth of Calcasieu Lake and has absorbed direct hits from Hurricane Rita, Hurricane Ike, and Hurricane Laura within the last two decades. That storm history, combined with a small, spread-out population and limited local infrastructure, makes self-sufficient backup power a standing requirement rather than an occasional precaution for the businesses, contractors, and government facilities working here.
Questions? Call 1-844-STAG-PWR
Call Our Team: 1-844-STAG-PWR
Looking for a 20kW-2000kW Generator Near You?
Whether you are planning for an outage or have an emergency situation, we’re ready 24/7 to ship a generator that will meet your power requirements.
Cameron Parish’s LNG export infrastructure and repeated direct hurricane hits drive the same generator demand we see across our home Gulf Coast market. Stag Power Rentals ships the same diesel-only, load-bank-tested fleet — 20kW to 2,000kW — to Cameron that we deploy nationwide, sized for LNG-adjacent contractor sites, parish government and emergency facilities, commercial fishing operations, and storm recovery crews. Route and site access into the parish, including any ferry crossing, are confirmed with each customer before dispatch. Confirm current availability and lead time for your location.
20kW-2000kW • Portable • Trailer • Skid • Diesel Generators
Stag Power Rentals supplies industrial and commercial diesel generators from 20kW to 2,000kW for LNG-adjacent contractor sites, parish government facilities, and marine and fishing operations throughout Cameron, Louisiana. Generators are dispatched from our Dickinson, Texas yard and delivered nationwide, sized according to connected load, startup demand, voltage, phase, and site access.
Cameron Parish’s LNG export infrastructure and its history of direct hurricane strikes create year-round demand for temporary power. For immediate assistance, call 1-844-STAG-PWR or request an industrial generator rental quote.
Cameron anchors a parish built around water: the Calcasieu Ship Channel, the Gulf Intracoastal Waterway, and the Gulf of Mexico all converge near the community, and that geography has drawn heavy industrial investment, most notably the Cameron LNG export terminal, which is permitted to ship several million tonnes of liquefied natural gas per year. That industrial footprint sits alongside a small resident population, a handful of parish government buildings, commercial fishing operations, and the marine support businesses that serve vessel and terminal traffic.
Stag Power Rentals supports that mix with a diesel-only fleet ranging from 20kW to 2,000kW, sized for everything from a single commercial building to a multi-unit deployment for a contractor site or emergency operations center. We do not carry natural gas units; every generator we dispatch runs on diesel, which holds up better than natural gas equipment when local gas infrastructure is disrupted or unavailable, a real consideration in a parish that has been through repeated storm rebuilding cycles.
Cameron Parish has been struck by three major hurricanes since 2005. Hurricane Rita made landfall in 2005 with winds near 120 mph and a storm surge recorded at 17.8 feet, flooding the parish before most rebuilding had even started. Hurricane Ike followed in 2008 with a 12-foot surge that damaged homes across the parish while Rita recovery was still underway. Hurricane Laura then made landfall in 2020 as a Category 4 storm with 150 mph winds and a 9 to 12-foot surge, again causing widespread damage. The parish’s population dropped roughly 79 percent between the 2000 and 2010 censuses as a direct result of that storm cycle, and the 2020 census recorded a population of only 315 in Cameron itself.
That history changes how backup power has to be planned here. In a low-population, low-elevation coastal community, utility crews, fuel suppliers, and repair contractors are stretched thin after a storm, and restoration priority typically goes to higher-density areas first. A generator rental that is sized, fueled, and staged before a storm removes that dependency, whether the load is a parish facility that needs to stay operational for emergency coordination or a commercial site that cannot afford an extended shutdown while the rest of the region recovers.
Because Cameron is geographically isolated relative to Lake Charles and the rest of Southwest Louisiana, generator sizing here should account for extended runtime and fuel self-sufficiency rather than just peak load. We work through actual electrical load, expected runtime between refueling, and site access before recommending a unit, matching equipment to the job instead of defaulting to a single size for every location.
| Facility Type | Recommended Generator Size | Typical Application |
|---|---|---|
| LNG Terminal & Marine Contractor Support | 600kW-2,000kW | Temporary power for staging areas, construction trailers, and marine support operations along the ship channel |
| Cameron Parish Government & Emergency Facilities | 150kW-300kW | Backup power for parish offices, emergency coordination points, and public facilities during and after storms |
| Commercial Fishing & Marine Businesses | 45kW-150kW | Keeping docks, cold storage, and processing equipment running through outages |
| Storm Recovery & Debris Removal Crews | 100kW-300kW | Mobile power for command posts, staging yards, and temporary recovery operations |
| Small Retail & Local Businesses | 20kW-45kW | Maintaining core operations for Cameron’s limited commercial base during utility interruptions |
Our dispatch point is 2025 Nichols Ave, Dickinson, TX 77539, and we deliver nationwide, including to Cameron. Reaching Cameron Parish means routing east into Louisiana toward the Lake Charles and Sulphur area, then south into the parish on the Louisiana Highway 27 corridor, which loops around Calcasieu Lake through wetland terrain before reaching Cameron. Part of that route to Cameron includes a ferry crossing over the Calcasieu Ship Channel, a deep-water channel that also carries heavy marine traffic serving the area’s LNG and industrial operations. Louisiana Highway 82 provides an alternate coastal approach through the parish as well. Site access, load-in requirements, and any ferry scheduling are worked out with each customer as part of planning the delivery; we do not quote fixed delivery windows sight unseen, since route and site conditions vary by job.
Stag Power Rentals equips a range of operations across Cameron Parish’s industrial and public-sector base, including emergency response and disaster recovery deployments following tropical weather, municipalities and government facilities that need to keep essential services running, and water districts managing infrastructure in a parish defined by its waterways. For larger sites, we also supply power distribution equipment, including distribution panel rentals, to route generator output safely across a facility.
Given Cameron Parish’s exposure to tropical systems, our hurricane contingency power plan is worth reviewing before storm season, whether you manage a parish facility, a commercial site, or a contractor operation working near the ship channel.
Is natural gas power available?
No. Stag Power Rentals’ fleet is diesel-only.
How large of a generator do I need for a commercial site in Cameron?
It depends on your electrical load and how long you need to run without refueling. Our team reviews your equipment list and site conditions before recommending a size from our 20kW-2,000kW fleet.
Can you supply power for a site near the Cameron LNG terminal or the ship channel?
Yes. We supply generators for contractor and marine support operations in the area, sized to the load and site access involved.
Do you deliver to Cameron given how remote it is?
Yes, we deliver nationwide from our Dickinson, TX dispatch point. Route and site access into Cameron Parish, including any ferry crossing, are worked out with each customer during planning.
Can a rental generator support parish government or emergency operations during a storm?
Yes. We supply generators sized for parish facilities and emergency coordination points, and recommend arranging equipment ahead of hurricane season rather than after a storm has made landfall.
What sizes of generators do you rent?
Our fleet spans 45kW, 150kW, 300kW, 600kW, and 1,500kW units, up to 2,000kW total fleet capacity.
Stag Power Rentals
2025 Nichols Ave
Dickinson, TX 77539
Industrial & Commercial Generator Rentals
1-844-STAG-PWR
If a hurricane has left your business without power call us. We can guide you through the generator rental process and help restore power to your business with as little downtime as possible.
If you want to get ahead of power outage, then signup for our Hurricane Contingency Plan >
