From refinery turnarounds to hurricane season, Port Arthur businesses turn to Stag Power Rentals for diesel generators ranging from 20kW to 2000kW, dispatched from our Dickinson, TX yard and delivered anywhere in the country. Every unit runs on diesel, never natural gas, and leaves our yard only after passing a load-bank test. We’ve powered commercial buildings, healthcare facilities, construction sites, industrial plants, and community events across the Gulf Coast, on both planned schedules and emergency call-outs.
What a Port Arthur business needs depends on what’s being powered and for how long, whether that’s a refinery turnaround, a construction project, or emergency standby ahead of hurricane season. For guaranteed availability before storm season pressure hits, see our hurricane contingency power plan. For active outages, call 1-844-STAG-PWR, or request a quote online for planned rentals.
Port Arthur sits on the Sabine-Neches Waterway, the third-busiest waterway in the U.S. by cargo tonnage and the nation’s top crude-oil import channel, about 90 miles east of Houston. The city has weathered direct hits from Hurricane Rita, Hurricane Ike’s severe storm surge in 2008, Hurricane Harvey’s catastrophic flooding in 2017, Hurricane Delta, Hurricane Beryl, and this year’s Tropical Storm Edouard, which left tens of thousands of Entergy Texas customers without power across Port Arthur, Beaumont, and Orange. Restoration after a major storm has stretched from days to nearly two weeks in the hardest-hit neighborhoods.
Entergy Texas serves the Port Arthur grid, and the city is home to the Motiva Refinery, the second-largest oil refinery in the United States, along with the TotalEnergies and Valero Port Arthur refineries and a deepwater port that docks more than 1,000 vessels a year. For refineries, terminals, hospitals, and manufacturers tied to this corridor, even a short unplanned outage can mean a costly shutdown or a safety incident.
Questions? Call 1-844-STAG-PWR
Call Our Team: 1-844-STAG-PWR
Looking for a 20kW-2000kW Generator Near You?
Whether you are planning for an outage or have an emergency situation, we’re ready 24/7 to ship a generator that will meet your power requirements.
20kW-2000kW • Portable • Trailer • Skid • Diesel Generators
Stag Power Rentals supplies industrial and commercial diesel generators from 20kW to 2,000kW for refineries, terminals, construction sites, and emergency backup power throughout Port Arthur and the Golden Triangle. Generators are dispatched from our Dickinson, Texas yard and delivered nationwide, sized according to connected load, startup demand, voltage, phase, and site access.
Port Arthur’s dense concentration of refining and marine terminal operations, combined with direct hurricane exposure, creates year-round demand for temporary power. For immediate assistance, call 1-844-STAG-PWR or request an industrial generator rental quote.
Port Arthur’s economy runs on refining and marine terminal capacity most cities never see: the Motiva Refinery, the second-largest in the United States, sits alongside the TotalEnergies and Valero refineries and terminals along the Sabine-Neches Waterway, which is also on track to become one of the largest LNG export corridors in the country. That combination keeps both planned maintenance and new construction generator demand higher here than in a typical Gulf Coast market.
Refinery turnarounds and terminal maintenance projects run on a scheduled outage window, and generator support for lighting, tools, instrumentation, and backup systems needs to be arranged well before that date arrives.
Pumps and motor-driven equipment at refining and terminal sites can draw far more power at startup than during normal operation. Motor horsepower, voltage, phase, starting method, and runtime should be confirmed before sizing.
The table below maps common capacity ranges to the loads and industries Stag sees most often in Port Arthur.
| Generator Capacity | Typical Power Requirements | Relevant Industries |
|---|---|---|
| 20kW – 45kW | Job trailers, lighting, tools, pumps, small commercial loads | Construction, local businesses |
| 125kW – 150kW | Larger pumps, commercial HVAC, refrigeration, multiple connected loads | Commercial property |
| 300kW – 400kW | Substantial commercial and industrial loads, pumping systems, production equipment | Manufacturing and warehouses |
| 600kW – 800kW | Large industrial machinery, refinery and terminal-adjacent operations, multiple critical systems | Refining and marine terminal operations |
| 1,000kW – 2,000kW | Full-facility power, major turnarounds, high-demand emergency systems | Emergency response, heavy industry |
Wind isn’t the only concern here. Port Arthur’s position on Sabine Lake and the Gulf Intracoastal Waterway puts storm surge front and center, on top of the wind damage every Gulf Coast city expects.
Generator demand across Southeast Texas spikes hard right before a storm makes landfall, exactly when availability gets tight. Our hurricane contingency power plan reserves a unit for your Port Arthur site ahead of that window.
Properties near Sabine Pass and the outer edges of Jefferson County can include undeveloped land, narrow entrances, or low-lying ground near Sabine Lake. These conditions should be identified before dispatch, with the generator location kept accessible to fuel trucks and technicians for the length of the rental.
Away from the refining corridor, Port Arthur still needs the same backup power a lot of Gulf Coast cities do, plus support for a calendar of local events.
A switchgear replacement or unexpected equipment failure can put a commercial building out of service for longer than it can afford. Stag provides dedicated generator rentals for commercial properties and backup power for local businesses.
Stag supplies generator power for outdoor festivals and corporate events and trade shows, scaling from a single booth to a full venue footprint.
Ongoing terminal and LNG-related construction along the waterway keeps generator demand for job sites in Port Arthur elevated on top of routine commercial and infrastructure building. A construction rental typically starts small, covering temporary offices, lighting, tools, and security before permanent utility service is connected, then scales up once HVAC and commissioning equipment come online.
Correct sizing starts with the load, not the square footage.
| Sizing Requirement | Why It Matters |
|---|---|
| Running Load | Determines combined electrical demand while equipment operates normally. |
| Startup Load | Motors, pumps, and HVAC systems can draw substantially more power during startup. |
| Voltage & Phase | The generator and distribution system must be electrically compatible with the facility. |
| Load Sequence | Staged startup can produce different requirements than starting several loads at once. |
| Runtime | Operating hours affect fuel planning, maintenance, and rental configuration. |
| Distribution | The project may require cables, panels, transformers, or transfer equipment. |
Equipment comes in trailer-mounted, skid-mounted, and sound-attenuated configurations, single-phase or three-phase. Browse Stag’s generator rental sizes, and where the job calls for more than the generator itself, Stag also supplies external fuel tanks, cables, transformers, and distribution equipment.
| Cost Factor | How It Affects the Rental |
|---|---|
| Generator Size | Larger capacity generally changes equipment, transportation, and fuel requirements. |
| Rental Duration | Short emergency deployments and longer planned rentals can have different pricing. |
| Delivery & Access | Rural, restricted, or industrial sites can affect transportation and setup. |
| Fuel | Consumption, external tanks, and refueling logistics can affect total cost. |
| Power Distribution | Cables, transformers, panels, and transfer equipment may be required. |
| Emergency Deployment | After-hours response, hurricane season, and regional equipment demand can affect logistics. |
For an accurate quote, provide the Port Arthur delivery address, requested rental dates, equipment being powered, running load, startup demand, voltage, phase, expected operating hours, connection requirements, and site-access conditions.
Request an Industrial Generator Rental Quote
Stag provides dedicated generator rentals for municipalities and government facilities, and water and wastewater operators can review Stag’s temporary generator solutions for water districts.
Port Arthur sits within Stag’s home Gulf Coast service region, roughly a two-hour drive from our Dickinson, Texas yard. Stag ships and delivers generators nationwide, not only regionally, with next-day deployment standard outside our home Greater Houston service area. We serve Port Arthur (ZIP codes 77640-77642) and surrounding Jefferson County communities including Groves, Nederland, Port Neches, and Sabine Pass, along with sites near Jack Brooks Regional Airport and the Sabine-Neches Waterway.
Stag Power Rentals offers generator capacities ranging from approximately 20kW to 2,000kW. Correct capacity depends on running load, startup demand, voltage, phase, and runtime.
Yes. Stag Power Rentals dispatches from its Dickinson, Texas yard and ships and delivers generators nationwide, including Port Arthur.
Yes. Temporary generators are commonly used for turnarounds, terminal maintenance, and other planned industrial outages requiring backup power for instrumentation, lighting, and tools.
Emergency generator inventory and transportation capacity can tighten quickly once a storm is forecast for the Gulf Coast. See Stag’s hurricane contingency power plan to reserve capacity in advance.
Delivery may be possible when the entrance, roads, turning area, ground conditions, and proposed placement area can safely accommodate the generator and transport vehicle.
Yes. Projects may require temporary cables, distribution panels, transformers, or transfer equipment. See Stag’s power distribution rental equipment.
Provide the delivery address, requested rental dates, equipment being powered, running load, startup demand, voltage, phase, expected operating hours, connection requirements, and site-access conditions.
Contact Stag Power Rentals with your delivery address, required dates, equipment being powered, running load, startup demand, voltage, phase, expected runtime, and site-access details.
Stag Power Rentals
2025 Nichols Ave
Dickinson, TX 77539
Industrial & Commercial Generator Rentals
1-844-STAG-PWR
If a hurricane has left your business without power call us. We can guide you through the generator rental process and help restore power to your business with as little downtime as possible.
If you want to get ahead of power outage, then signup for our Hurricane Contingency Plan >
